The Ripper is a revolutionary system for the Roll-Off Goggle. With the press of the wireless handlebar button, The Ripper rapidly pulls the cord on most roll-off systems to clear the riders vision in less than a second.
Automated Goggle Roll-Off System
The wireless main unit replaces the need to take your hand off the handlebar to reach up and pull the cord on the roll-off system. Not only is this safer, but faster, and means you're free to clear your vision whenever you NEED to!
Wireless Handlebar Remote
The remote sits conveniently next to your grip, allowing easy access to press the button.
With a tap of the button, the arm pulls the cord in a rapid-fire motion, clearing vision in less than 1 second*
Keep Your Hand on the Bar
With the Ripper you no longer need to take your hand off the the handlebar to clear your vision!
It takes minutes to setup the Ripper and operation is as easy as pushing a button.
Mount to strap
Feed the strap through the strap mounts, then slide the Ripper forward until it touches the back of the roll-off canister.
Hook Pull Arm
Pull out the pull-cord and hook the Ripper pull arm over the cord.
Turn on the unit then quick press the sync button to change between Auto-Burst or Momentary/Continuous mode.
Place wireless remote button in desired location, then screw back mount and tighten down.
The pull cord is still operational even when The Ripper is attached.
Sync Multiple Remotes
Sync the Ripper to multiple Wireless Remotes for multiple bike setups. Extra buttons available
Universal goggle strap mount works with your favorite goggle roll-off system*.
Press Remote button to activate the Ripper for approx 1.5 seconds. Use this mode to clear vision automatically with a tap of the button.
Press & HOLD Remote button to activate the Ripper for desired time (up to 5 seconds). Use this mode to have more control of roll usage.
The Ripper will typically last up to 10 rolls before needing to be recharged via the micro-USB port on the main unit. Battery level is indicated by the 3 LEDs
At only 4.1oz (116g) it's lighter than the typical action camera setup and almost half the weight once you include action camera mounting hardware.
Clear goggles in as little as 1 second
No more taking hands off handlebar to clear roll-off
Use almost any roll-off goggle*
Manual override incase of mechanical failure or damage
Quick set up
Auto-Burst Mode or Momentary/Continuous Mode
Sync multiple Rippers to one remote for quick change in race situation
Will it fit my roll-off goggles? We have designed the Ripper to fit as many roll-off systems as possible. Please see the compatibility tab for a full list of tested units. If you do not see your goggle please Conact Us for confirmation
California Prop. 65 WARNING: This product can expose you to Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Sign up to get the latest on sales, new releases and more …
Limited Time 10% Off
Save on your 1st order and get email offers when you join.
Eligible for first-time website purchases only. Emails may take a few minutes to process and could get flagged by email providers as junk so be sure to wait a little bit and check your junk and/or spam folders.