UK/EU▾Your Cart is Empty
Lock-N-Load - Strapless Moto Transport System
£159.99
- ▼Features
-
- Saves your fork seals
- No more straps or wheel chocks
- Load more bikes and gear in your truck, van or trailer
- Quick release from the trailer floor
- Extra trailer plates are available (Sold Separately)
- TRUCK PLATES available for mounting in trucks (Sold Separately)
- ▼Specifications
-
- LOCK-N-LOAD
- Model# 77849
- Size: 20” x 10” x 18” (50.8cm x 25.4cm x 45.7cm)
- Weight: 20lb (9.1kg)
- 1 year warranty
Designed to fit most FULL SIZE MX bikes
(or bikes with similar geometry)
- LOCK-N-LOAD JUNIOR
- Model# 00204
- Size: 20” x 10” x 16” (50.8cm x 25.4cm x 40.6cm)
- Weight: 19lb (8.6kg)
- 1 year warranty
Designed to fit most 85cc MX bikes
(or bikes with similar geometry)
How to measure your bike
To properly measure your bike, ask for assistance to hold your bike perfectly vertical and use two tape measures at the same time to measure footpeg height. Make sure both measurements are the same. Feel free to contact us if you have any bike specific questions. Select your desired size in the online store when ordering.
The jaws are fairly large and we have found that they will fit most oversized or rotating aftermarket foot pegs on the market.
- ▼Included
-
- [1] Lock-N-Load or Lock-N-Load JUNIOR
- [1] Trailer Mounting Plates
- [1] Mounting Hardware
- [1] Instruction Sheet
Available in Two Sizes
**Measure your bike before ordering to ensure fit**
The Easiest Way to Transport your Bike
The “Lock-N-Load” Moto Transport System securely holds your motocross bike in your trailer without the use of tie-down straps, floor anchors or wheel chocks. It takes an enormous amount of pressure off of the fork seals during transit, and it frees up valuable space allowing the transport of more motorcycles or gear. Additionally, the Lock-N-Load can quickly be removed from the trailer floor by unscrewing the 4 thumb screws leaving only the low profile mounting plates. Each plate has a “D” ring for additional anchor points on your trailer floor.
Rotate the knobs into the lock position and simply roll or ride your bike into the trailer until your foot pegs hit the open jaws of the Lock-N-Load.
Then step on the upper jaws and they will automatically lock into place.
For additional safety, insert the attached locking pins prior to transport. You can replace the locking pins with pad locks for added security and a theft deterrent.
To release your bike, simply rotate the knobs into the release position and step on the top jaws.
This will automatically release the jaws and free your motorcycle.
Available in Two Sizes
Standard
Designed to fit most FULL SIZE MX bikes
(or bikes with similar geometry)
*see specifications for size guide
Junior
Designed to fit most 85cc MX bikes
(or bikes with similar geometry)
*see specifications for size guide
Features
Saves your fork seals
No more straps or wheel chocks
Load more bikes and gear in your truck, van or trailer
Quick release from the trailer floor
Extra trailer plates are available (Sold Separately)
TRUCK PLATES available for mounting in trucks (Sold Separately)
What's Included
Lock-N-Load
Available in two sizes
1x Pair Trailer Plates
plus mounting hardwareCalifornia Prop. 65 WARNING:
This product can expose you to Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
California Prop. 65 WARNING:
This product can expose you to Bisphenol A, which
is known to the State of California to cause birth defects or other reproductive harm. For more information go
to www.P65Warnings.ca.gov.
You may also like
