UK/EU▾Your Cart is Empty
Lock-N-Load Pro - Strapless Moto Transport System
£269.99
-
- Reduce pressure on fork seals
- No more straps or wheel chocks
- Load more bikes and gear in your truck, van, or trailer
- Quick release from floor
- Fully adjustable
- Mounts in your trailer, truck, or van
- Extra mounting plates available
- Works with 2-strokes and 4-strokes
Available in Two Sizes
**Measure your bike before ordering to ensure fit**
-
- LOCK-N-LOAD PRO
- Model# 00174
- Size: 20” x 10” x 18” (50.8cm x 25.4cm x 45.7cm)
- Weight: 13.2lb (5.98kg)
- Plate Dimensions: 21.25” x 6.75” x 0.5” (54cm x 17.1cm x 1.3cm)
- 1-year warranty
Designed to fit 85cc to Enduro bikes
(or bikes with similar geometry)
Max Weight: 315lbs (142.9Kg)
- LOCK-N-LOAD PRO MINI
- Model# 00176
- Size: 20” x 10” x 16” (50.8cm x 25.4cm x 40.6cm)
- Weight: 12.6lb (5.71kg)
- Plate Dimensions: 21.25” x 6.75” x 0.5” (54cm x 17.1cm x 1.3cm)
- 1 year warranty
Designed to fit 50cc jr to 110cc MX bikes
(or bikes with similar geometry)
Max Weight: 200lbs (90.7Kg)
How to measure your bike
To properly measure your bike, ask for assistance to hold your bike perfectly vertical and use two tape measures at the same time to measure footpeg height. Make sure both measurements are the same. Feel free to call if you have any bike-specific questions. Select your desired size in the online store when ordering.
The jaws are fairly large and we have found that they will fit most oversized or rotating aftermarket foot pegs on the market.
-
- [1] Lock-N-Load PRO or Lock-N-Load PRO MINI
- [1] Mounting Hardware
- [1] Instruction Sheet
The All New Lock-N-Load Pro
The Lock-N-Load Pro Moto Transport System securely holds your motocross bike in your trailer without the use of tie-down straps, floor anchors, or wheel chocks. It takes an enormous amount of pressure off of the fork seals during transit, and it frees up valuable space allowing the transport of more motorcycles or gear. Additionally, the Lock-N-Load can quickly be removed from the trailer floor by loosening the 2 screws and removing the struts, leaving only the low profile mounting plate.
Aluminum Construction
Built tough to transport bikes safely and lightweight enough to store on a shelf in your garage when not in use.
Fully Adjustable
Adjust the new Lock-N-Load Pro on the fly to a large range of bikes with the new ratchet system.
Rubberized Jaws
Changeable rubberized jaw pad keeps bike more secure and protects footpegs
Switch Release
Simply flip the switch to lock or release the arm ratchet system. Flip the switch down when locking the bike down then flip the switch up to allow the jaws to release.
Mounting Plate
The low-profile plate mounts into your truck, trailer, or van. Allows lateral adjustability for wider bikes.
How to install Lock-N-Load Pro
Wood Floor Installation and Use
Truck Bed Installation and Use
Available in Two Sizes
Bike Size Ranges: 50cc Jr to 110cc Trail (max weight: 200 lbs)
Bike Size Ranges: 85cc to Enduro (max weight: 315 lbs)
Features
Reduce pressure on fork seals
No more straps or wheel chocks
Load more bikes and gear in your truck, van, or trailer
Quick release from floor
Fully adjustable
Mounts in your trailer, truck, or van
Extra mounting plates available
Works with 2-strokes and 4-strokes
What's Included
Unboxing video
Lock-N-Load Pro
Available in two sizes
Mounting hardware included
Accessories
California Prop. 65 WARNING:
This product can expose you to Bisphenol A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.